Impressions and Models
We continually emphasize the importance
of accurate impressions and working models. Every practice strives
for excellence in all impressions and models, but the precision
fit of the Indirect Bonding trays and custom pad bases increases
the necessity for 100% accuracy. We recommend a high quality alginate
with models poured in orthodontic stone. Please review the accuracy
of all models prior to sending to Specialty.
Reference Lines on
Models
Unless done in the doctor’s office, we place a long axis
line on the models for all teeth to be bracketed as a visual indicator
to reference the vertical “centerline” of the bracket.
The specific orientation of the brackets to the long axis may
vary depending on the alignment references (bracket body, slots
and bases) used by various manufacturers.
Specialty Appliances
Indirect Bonding Rx Form and Delivery Times
The Specialty Appliances Indirect Bonding prescription form should
include the doctor's name and address, the patient's name, the
date shipped and the date requested for appliance placement. We
generally require three working days in our laboratory for Indirect
cases. When shipping times are added, many practices receive their
cases back within ten days. On the diagram of the teeth, please
indicate which teeth are to be bonded, banded, extracted, or not
treated. Detailed bracket placement information can be specified,
as well as instructions for fabricating and sectioning the transfer
trays.
Brackets
When enclosing brackets with your models, please place them on
a sticky card with clear tape over them, or use a plastic bracket
case that holds each bracket in its proper place. We are able
to place brackets from any manufacturer; these should be sent
to Specialty with your models and Rx form.
Supplies and Materials
Used for Indirect Bonding
Indirect Bonding requires certain specific supplies and materials
for consistent results. Examples include the Nola Dry Field assembly
and the needle syringe used to apply an exact amount of adhesive
to the backs of the custom pads. Pleaser refer to the Specialty
Appliances Indirect Bonding reference Manual for a complete list
of supplies and materials.
